Aldex Chemical

Aldex C-800X5 copolymer is designed to act as a mechanical lubricant, which is stable at 274°C (525°F). It is compatible with water-based, oil-based, and synthetic-based mud systems. Because of its high compressive strength, this lubricant is able to minimize casing wear, reduce torque and drag and lower the risk of differential sticking in depleted, underbalanced formations.

Download C-800×5  Technical Bulletin (PDF)

 

Physical Chemical Properties

Polymer Structure:	Styrene/Divinylbenzene
Physical Form:	Semi-transparent beads
Odor:	No Odor
Solubility in Water:	Insoluble
Reactivity:	Chemically inert
Moisture Content:	1% Maximum
Specific Gravity:	1.05
Shipping Weight:	40 lbs per cubic foot
Screen Size Distribution: Fine: Course:	35 to 140 mesh 18 to 40 mesh
Conversion to H+ Form:	99% minimum
Total Capacity H+ Form:	1.8 meq/ml minimum
Temperature Range:	274ºC (525°F)

C-800×5 Advantages

• Reduces friction
• Minimizes casing wear
• Decreases torque and drag
• Break capillary attraction
• Compatible with all drilling fluids
• Lowers risk of differential sticking
• Non-abrasive

 

Applications

Aldex C-800X5 copolymer is designed for use in situations where torque, drag, casing wear, and/or the potential for differential sticking are likely typical applications for Aldex C-800X5 Copolymer are highly deviated holes, wells with high tortuosity, and wells with severe or unplanned doglegs where high torque and drag are encountered.

The initial concentration of Aldex C-800X5 copolymer is in the range of 5.6-17kg/m3. This value can be adjusted in accordance with the torque and drag limitations of the drilling operation. After the initial treatment, additions need to be made to replace the product that is left embedded in the formation or the mud filter cake.

In wells where rotation inside of the casing is required for extended periods of time, Aldex C-800X5 copolymer reduces wear, which in turn reduces the risk of compromised casing integrity.

Aldex C-800X5 Copolymer as a mechanical lubricant can also be spotted in an open hole for logging
operations and for running casing at 22.8-34.2 kg/m3.
It is also available in fine or coarse sizes, varying from 100 microns to 1000 microns.

Packing and Storage

• Product packaged in 40 lb. bags.
• Store in a dry location away from sources of heat or ignition, and minimize dust.

Limitations

Conventional solids control equipment discards beads from the system; a Bead Recovery Unit (BRU) should be used to keep beads in the mud system.

Toxicity and Handling

Bioassay information is available upon request.

Handle as an industrial chemical, wearing protective equipment and observing the precautions described in the Material Safety Data Sheet (MSDS).

Safety Information

A material safety data sheet is available for Aldex C-800×5. Copies can be obtained from Aldex
Chemical Co., LTD. Aldex C-800×5 is not a hazardous product and is not WHMIS controlled.

Caution: Acidic and basic regenerant solutions are corrosive and should be handled in a manner that will prevent eye and skin contact. Before using strong oxidizing agents in contact with ion exchange resin, consult sources knowledgeable in the handling of these materials.